DYNA® AQUABAN 200

DYNA® AQUABAN 200 Waterproofing & Anti-Fracture Membrane is a thin, loadbearing waterproofing designed specifically for the special requirements of ceramic tile, stone and brick installations. A self-curing liquid rubber polymer and a reinforcing fabric are quickly applied to form a flexible, seamless waterproofing and crack isolation membrane that bonds to a wide variety of substrates.

ADVANTAGES

– Inhibits stain causing mold and mildew growth in the substrate with antimicrobial product protection.
– Safe, no solvents and non-flammable.
– Interior and exterior use.
– Vertical and horizontal surfaces (including ceilings)
– Thin – 0.5 mm (0.02”) thick when cured
– Anti-fracture protection of up to 3 mm (1/8”) over shrinkage and other non-structural Cracks.
– Extra Heavy Service rating per TCNA (ASTM C627 Robinson Floor Test).
– IAPMO and ICC Approval.
– Applies quickly with a paint brush, roller, or trowel.
– Fast cure—ready in hours for finishes.
– Install tile, brick and stone directly onto membrane.
– Easy cleanup—use water while fresh.
– Protects concrete & reinforcing steel from corrosion.

COLORS

Color: Blue

USES

– Swimming pools.
– Fountains & water features.
– Shower pans.
– Stalls.
– Tub surrounds.
– Bathrooms & laundries (industrial, commercial & residential).
– Spas.
– Hot tubs.
– Kitchens & food processing areas.
– Terraces & balconies over unoccupied spaces.
– Countertops.
– Facades.
– Steam rooms (when used in conjunction with a vapor barrier).

LIMITATIONS

– Do not use as a primary roofing membrane over occupied space.
– Do not use over expansion joints, structural cracks or cracks with vertical differential movement.
– Do not use over cracks >3 mm (1/8”) in width.
– Do not use as a vapor barrier (especially in steam rooms).
– Not for use directly over particle board, luan, Masonite®, or hardwood floors.
– Do not expose unprotected membrane to sun or weather for >30 days.
– Do not expose to negative hydrostatic pressure, excessive vapour transmission or solvents.
– Must be covered with ceramic tile, stone, brick, concrete, screeds, terrazzo or other traffic-bearing course.
– Do not install directly over single layer wood floors, plywood tubs / showers / fountains or similar constructs.

SUITABLE SUBSTRATES

Concrete, cement mortar beds, cement plaster, concrete and brick masonry, Exterior Glue, Plywood, Gypsum Wallboard, ceramic tile and stone, cement terrazzo, cement backer board.