DYNA® CERAFLEX 610

Consisting of a one-component polymer/latex modified Portland cement mortar for the installation of impervious porcelain, large format tile, glass mosaics, ceramic tile, marble, granite, and all-natural and dimensional stone tile. For absorptive, semi-vitreous tiles and vitreous tiles in service of industrial, commercial, and residential use on walls and floors. It provides a permanent installation with a high bond and compressive strength and requires no soaking of the tiles. DYNA® CERAFLEX 610 | Polymer-Modified Thin-Set Mortar (Professional Grade) is resistant to water after being cured but does not provide a waterproof barrier. It is freeze/thaw and radiant heat resistant. It provides high sag resistance for ease of installation of large format tiles.

USES

– For interior and exterior setting of non-vitreous, semi-vitreous and vitreous floor and wall ceramic tiles, porcelain stoneware tile, marble, granite, quarry tile, pavers, slate and natural and dimensional stone tiles and slabs.
– Tiles can be set over concrete masonry, Portland cement mortar beds, glass mesh mortar units, gypsum board, unglazed ceramic tile, marble, clay tile, prepared existing cementitious terrazzo floors and cementitious backer units.
– It can be used for residential, commercial and industrial installations.
– It may also be used for the installation for indoor residential and light to moderate commercial floors and countertops in dry areas only over CSA-0221 EXTERIOR SELECT or (SEL TF) Douglas Fir plywood according to COFI classification, vinyl asbestos tile and dry-cut back adhesive.

COLORS