DYNA®OPTIMAX Polymeric Jointing Sand – 22.7kg/50lb

OPTIMAX Premium Polymeric Jointing Sand is a dry mixture of calibrated sands, polymers, binders, and dedicated chemical controlling agents specifically designed to bind firmly and easily together in horizontal pavement joints. Applied dry into the pavement joints, it will harden and stay in place after activation. Carefully blended with dedicated control agents, the quality of OPTIMAX Premium Polymeric Jointing Sand ensures increased stability, performance, and lasting durability to your paver projects. OPTIMAX Premium Polymeric Jointing Sand retains adequate elasticity needed to adapt to the movements of the pavement surface. It is resistant to erosion due to weather, maintenance, and traffic. It features EZ Sweep technology to ensure no haze is produced on your pavement surface and that the sand is more easily swept in, saving you both time and money in the process. Also available in our Designer Colors (Jet Black, Beach
Buff & Terra Cotta).

FEATURES & ADVANTAGES

–  “Zero dust” EZ SWEEP TECHNOLOGY with no haze saves the installer both time and money
– Ideal for commercial, high traffic, and sloped applications
– Ideal for false joints
– Eliminates washout of sand into pools
– Low temperature set up – 0°C (32°F) and above
– Ideal for narrow and wide joints
– Retains a high compressive strength even when exposed to water
– Has high washout resistance from rain and water
– Has high erosion resistance
– Deters ants, insects, and weeds
– Provides a greater degree of coverage

RECOMMENDED SURFACES

DYNA® OPTIMAX Polymeric Jointing Sand should be used to fill pavement joints of Concrete Pavers and Slabs, Natural Stone and Clay Pavers installed on horizontal surfaces such as driveways, patios, pool decks, walkways, and garden areas. Highly recommended for surfaces with wider paving joints, for steep-sloped areas, or for areas that are exposed to heavy traffic and heavy maintenance duties.

JOINT SPECIFICATION

Minimum Width of Joint: 2.0 mm (1/16”)
Minimum Depth of Joint: 32.0 mm (1 1/4“)

LIMITATIONS

– Install only at or above 0°C (32°F).
– Installation of the pavement must be done according to the various ICPI specifications to ensure the maximum benefit of this product.
– Do not leave OPTIMAX on the surface prior to wetting as it will adhere to the surface and will be difficult to remove.
– Not a substitute for a mortar or cement grout.
– Do not apply to wet or damp pavement surfaces.
– Do not apply if rain is forecasted less than 48 – 72 hours after installation.
– This product is not designed for submerged water applications.