BL-10 Ladder Reinforcement for 10 inch Block

For 25cm (10″) Block. The BL-10 consists of two parallel side rods with cross rods welded at 16” (400 mm) O.C., thus forming a ladder configuration.

• Overall measurement (side-to-side rod) is approximately 2” (50 mm) less than the nominal wall thickness.
• A fabricated ladder-type reinforcement designed to be embedded in the horizontal mortar joints of masonry walls.
• Approx. 8″ x 10′ Length
• 9GA Mill Galvanized

NOTE:

• Bed joint alignment for connecting wythes recommended