DYNA® MULTIFLEX 620

Consisting of a one component polymer / latex modified Portland cement mortar for the installation of impervious porcelain, large format tile, glass mosaics, ceramic tile, marble, granite, and all natural and dimensional stone tile. For absorptive, semi-vitreous tiles and vitreous tiles in service of industrial, commercial and residential use on walls and floors. It provides a permanent installation with a high bond and compressive strength and requires no soaking of the tiles. DYNA® – MULTIFLEX 620 | Polymer-Modified Thin-Set Mortar (Universal Grade / Multi-Purpose) is resistant to water after being cured but does not provide a waterproof barrier.
It is freeze / thaw and radiant heat resistant. It provides high sag resistance for ease of installation of large format tiles.

USES

– For interior and exterior setting of non-vitreous, semi-vitreous and vitreous floor and wall ceramic tiles, porcelain stoneware tile, marble, granite, quarry tile, pavers, slate and natural and dimensional stone tiles and slabs.
– Tiles can be set over concrete masonry, Portland cement mortar beds, glass mesh mortar units, gypsum board, unglazed ceramic tile, marble, clay tile, prepared existing cementilious terrazzo floors and cementilious backer units.
– It can be used for residential, commercial and industrial installations.
– It may also be used for the installation for indoor residential and light to moderate commercial floors and countertops in dry areas only over CSA-0221 EXTERIOR SELECT or (SEL TF) Douglas Fir plywood according to COFI classification, vinyl asbestos tile and dry-cut back adhesive.

FEATURES & ADVANTAGES

– Easy to Handle: Plastic, workable, glides on, non-sagging, non-slipping, long open time and increased tile adjustability.
– High Bond Strength: Greater than 500% stronger than mastic type adhesives.
– Versatile: One material can be used for floor and wall applications. Bonds to cementitious and plywood substrates. Interior And Exterior applications. Can be used on numerous substrates. Good porcelain stoneware tiles installations.
– Premium Performance: Is radiant heat resistant. Increased freeze / thaw resistance over conventional thin-set mortars. High bond strength. High impact and flexural strength. High water resistance and less water permeable than conventional thin-set mortars.

COLORS

LIMITATIONS

1. Stone such as Rosso Levanto, Negro Marquina or any green marble can be set with this material, but due to the characteristics of these types of stone, warpage may occur due to the water in the thin-set mortar. It is therefore, recommended that DYNAPOXY 6100 be used for the setting of these types of stone.
2. For the installation of white or translucent marble, a white setting mortar should be used.
Do not use a grey mortar mix as this may discolor or stain the stone.
3. Do not use over presswood or particleboard, masonite, chipboard, laun, asbestos board, gypsum floor patching compounds, metal, glass, plastic, or any other unstable materials which are deemed unsuitable substrates.
4. Do not use in temperatures below 10°C (50°F) or above 40°C (104°F).