DYNACOAT 100® SCRATCH-COAT

DYNA® DYNACOAT 100 consists of a Portland cement powder, graded silica aggregates and chemicals carefully selected and controlled by DYNA. It is a premium performance, high compressive strength scratch and level coat which when applied over a metal lath, provides a thin and stable mortar substrate to receive setting material for ceramic tile and natural stone installation. It has been specifically formulated to form a dense, hard, flexible and water resistant scratch and level coat. It can also be used as a level coat on horizontal or vertical surfaces when it is desired that a smooth and even substrate is desired for the installation of ceramic tile.
R-MP is a concentrated acrylic primer that enhances the performance and adhesion of a DYNA brand of self-leveling underlayments (SLUs), self-leveling overlayments (SLOs) and cement or gypsum based patching and skim-coating compounds on nonabsorbent surfaces such as ceramic tile, vinyl composition tile (VCT), epoxy moisture barriers and adhesive residue, as well as profiled, absorbent surfaces. Suitable for a wide variety of substrates, PRIMER-MP combines excellent versatility with easy of application and is quick-drying.

LIMITATIONS
– Do not use over presswood, particle board, Masonite, chipboard, laun, asbestos board, gypsum floor patching compounds, metal glass, plastic or any other unstable materials which are deemed unsuitable substrates for floors.
– To be used for interior residential floors when mixed with water. Can be used for light traffic commercial floors when mixed with DYNALASTIC 5000, CERAPLY 5010 or DYNACRETE 5220.
– Do not use in temperatures below 10°C (50°F) or above 40°C (104°F).
– This product when cured is an underlayment and is not intended to be used as an overlayment.